bespoke ferrite machining facility Tolerances AL and Inductance Values Down To +/-1% Dimensional Values Down To +/-0.005mm General Machining To +/-0.05mm Wireless Probing System 3D Printer Lapping Machine Laser Tool Setting System Laser Cutting System Next Prev Equipment CanDo Solutions Gateway works with customer partners nationally and internationally to fulfill our customers demands both with supply and design support. If required we can offer our customers extended services with UK based professional experts to offer a complete design and manufacturing solution. Bespoke coil former: - Moulded in pin - Machine - 3D printed Winding service Transformer redesign Transformer manufacturer Assembly Moulded and machined parts Take A Look At Our Work One of the Largest Ferrite Stockists in Europe Offering over 700 cores from our UK warehouse, Gateway is one of the largest ferrite stockists in Europe. Our stock profile is built to ensure we cover all customer applications including power, signal and EMI for both low and high frequency applications. Stocking material from Ferroxcube, TDK (EPCOS), Fair-Rite and Mag Inc ensures quality is never an issue for our customers. Gateway also stocks an exclusive range of blocks from TDK (EPCOS), Ferroxcube, Fair-Rite and Mag Inc. The range of stock comprises of the latest materials from the leading ferrite manufacturers. The Machine Shop has close links factories, allowing us to work with the technical departments to create new materials that are designed specifically for our customers application, these can then be pressed into blocks and machined. Tooling Gateway works exclusively with UK tooling manufacturers to produce the specialist tooling required for machining ferrite. All machine tools are produced to Gateways exact specification, a specification built on years of knowledge, experience and most of all Research & Development. This allows The Machine Shop to offer a dynamic and flexible response to our customers requirements and provides a solid foundation to meet the most demanding of designs allowing us to machine the most challenging geometries whilst maintaining lead times as short as one week for custom geometry cores. Workholding Gateway uses the latest technology to continuously refine its work holding techniques. In turn this allows us to push our machining capabilities and meet the most demanding of requirements. The nature of ferrite dictates that standard mechanical work holdings cannot be used. The Machine Shop uses magnetic workholdings as the foundation of all jobs. These magnetic work holdings are customized and supplemented through additive and subtractive machining techniques to ensure we keep costs and delivery times down to an absolute minimum for our customers. Tools & Workholdings Ferrite Block Materials Centre limb gaps - AL, inductance and physical gaps Adding a centre limb gap allows us to tune the core’s inductance value to the customer’s requirement. The larger the gap the smaller the inductance value of the core. Gaps are applied to the centre limb to control leakage and offers a vast improvement on mechanical gapping (adding material between all 3 limbs). The higher inductance values can be influenced by very small imperfections or changes in dimensional gap; therefore, it is crucial to have high precision machinery to allow us to hit tight tolerances down to +/-1% on inductance and +/-0.005mm on dimensional gaps. Gapping a core can also influence the Bsat figure by pushing this higher. Profile and contour machining - chamfers and fillets Chamfers and fillets reduce the number of sharp edges on a core – they are often found on square parts that may need to fit inside of a round bobbin. These processes are also useful for reducing the degradation of the insulator around the wire that may be wound straight onto the core, as they reduce the chance of the wire being damaged, or even broken, upon installation. Hole cutting - small drill holes, large bores With the use of our 3-axis machines and specialist tooling, we are able to drill holes into ferrite blocks. These holes can be bored out to the desired size, allowing tighter tolerances to be achieved. Holes can be useful for EMC applications where the distance between the ferrite and the conductor can have a direct impact on the attenuation levels available. Holes are also used for mounting and can be used to insert temperature sensors into the centre of the core to allow the user to record the core temperature. Full 3/5-axis CNC machining CNC (Computer Numerical Control) machining allows us to generate a program which our machines can follow to create the desired part. 3-axis machines operate on the x-y-z planes which allow unique designs to be produced, however 5-axis machines have the additional benefit of an a-b axis – this allows for more intricate parts to be created from a single program. The added a-b axis allows for the stock to be moved, as well as the tooling. We have refined our machining techniques to ensure we produce the highest quality parts. Custom core geometries from blocks Custom core geometries can be machined from blocks with help from our 3-axis machines and close partnerships with suppliers of raw material – we work with some of the biggest names in ferrite, including TDK, Ferroxcube, Fair-Rite and Magnetics Inc. Stocking a wide range of block sizes allows us to choose the most appropriate material to machine each custom geometry. Our motto is “If you can dream it, we can machine it” and we always aim to exceed customer expectations. This is a cost-effective alternative to paying for a mould tool and pressing/sintering the custom geometries which can cost £1000’s per tool, we also offer rapid turnaround. Toroid splitting A toroid can be split into two pieces, which allows the part to be used in places which already have high-voltage wires installed and can’t be removed easily. Splitting the toroid enables each half to be placed on either side of the wire to be joined together. Our custom-made jigs mean the parts can be held in place whilst machining in order to reduce any chipping or fracturing. Custom cutting discs also enable the toroids to be cut using our 3-axis milling machines. Toroid air gaps We can add small air gaps into toroids using our dedicated tooling, gaps as small as 0.8mm up to large gaps, this is useful for changing the inductance value of the toroid and is popular in sensor applications. Rod machining - cutting, length reduction We can machine rods to the length required by a customer – to do this, we use a specific cutting wheel which cuts through the excess rod and leaves a tidy finish on the machined rod. With the aid of custom jigs, we are able to machine rods to any length required. This enables the final part to fit a variety of applications – small or large, achieving the desired effect. Slot cutting Cutting slots in parts are useful for allowing an access point for a cable to enter the centre of the part. They are most useful for pot cores that don’t have an opening in the outer limbs for cables to exit. Our custom tooling is used when machining which allows for a precise slot to be achieved. Ferrite gluing Ferrite gluing is a useful method of achieving parts that can’t be made from just one block of material. This increases the scale of parts that can be created and enables customers to create truly bespoke pieces. We also use two different types of glue, with one being able to withstand higher temperatures, which again increases the types of projects that we are able to undertake. Lapping and mirror finish Lapping is a process that allows us to create a perfectly flat face. This is done through removing material from the surface of the ferrite to reduce the residual air gap. This technique allows us to increase the Inductance value of the core, we can further increase this by creating a mirror finish on the mating faces. Our Capabilities If You Can Dream It, We Can Machine It! The Ferrite Gateway Machine Shop offers customers a complementary service to provide custom gapped and machined ferrite cores from our specialist UK facility. Gateway already stocks a vast range of ‘standard’ gapped cores as well as a comprehensive portfolio of ungapped ferrite cores. The machine shop facility now gives customers across Europe and USA the opportunity to have cores gapped to bespoke inductance, AL or dimensional specification without the hassle of high minimum order quantities or extended factory lead times. The Machine Shop specialises in machining custom geometry ferrites utilising our exclusive channel for ferrite blocks from some of the biggest names in ferrite. Get In Touch Services We Provide CAD Every job that passes through The Machine Shop will have a dedicated CAD drawing, drafted by one of our team of trained engineers, to meet the specification requirements of the customer. After customer approval of the drawing, and any agreement on First Article Inspection samples, the job will be committed to The Machine Shop’s schedule. Planning The Machine Shop schedule planning is maintained with the Production Works Order system embedded in our operating system. After drawing approval is received, and the works order is raised, the customer will receive an indication of job completion dates based on machine loading. The Gateway operating system has live updates for Sales staff so that they can monitor the progress of Machine Shop jobs, and report any changes to schedules where appropriate. In some cases, capacity adjustments may be possible to expedite urgent customer requirements. Measurement Substantial investment has been made in a wireless probing system that allows measurements to be taken in three dimensions with up to 0.001mm repeatability. The probing system is driven by our CNC system and provides customers with absolute measurements that they can rely on. We are able to machine to the following tolerances: AL and inductance values down to +/-1% Dimensional values down to +/-0.005mm General Machining to +/- 0.05mm Testing The Machine Shop has developed exacting standards and test procedures to ensure everything that is shipped meets the specification outlined in the drawing. We stock a large range of standard test coils which are all wound to ensure the full winding area is filled with 100 turns of wire; ensuring the winding is evenly distributed over the gap which increases test accuracy. As well as standard test coils, The Machine Shop can use customers test coils and test to their exact specification. The Machine Shops standard test procedure is to sample batch test the finished cores to ensure the specification is met. The test results are electronically stored against the works order job and can be recalled at any stage. The Machine Shop can offer 100% testing and can also offer a First Article Inspections service, based on our own standard template or adjusted to match the customers test requirements. Ultrasonic Cleaning and Packaging During the machining process coolant is used to control temperature effects, reduce tool wear and control airborne particulates. After machining, the ferrite is often left with a deposit of ferrite sediment that needs to be removed. The ultrasonic cleaning bath is used to remove the ferrite sediment using environmentally friendly cleaning agents, and then the cores are air treated at room temperature prior to packaging. All ferrite cores are securely packaged in polystyrene shipping containers and/or secure vacuum packaging to avoid damage when in transit. Standard or customer bespoke labelling will then be affixed to the packaging and relevant test documentation will accompany each batch of material supplied. Custom Packaging Although often forgotten about, packaging is an important element of the process as this is what keeps your newly machined parts safe in transit. Parts are typically packed back into their original packaging, but this sometimes isn't possible with bespoke geometries. This is where custom packaging comes in! Our team are able to design packaging around your parts which are then precision cut using our laser cutter, creating a snug fit to help prevent breakages. Open Magnetics Open Magnetics is a set of online tools for designing and simulating magnetic components, based on public scientific research and knowledge, stemming from the idea that all scientific knowledge is a fundamental right and should be accessible to the whole human race, View Tools On the Blog... Noch keine Beiträge in dieser Sprache veröffentlicht Sobald neue Beiträge veröffentlicht wurden, erscheinen diese hier. Overview Capabilities Gallery Process & Quality Tools Block Materials Contact Us More

Enclosures CamdenBoss brings you Hex-Box! The IoT enclosure designed with user-friendly customisation and flexibility in mind. The enclosure is manufactured using 100% recyclable ABS UL94-VO material, with an excellent modern aesthetic which is packed full of features making it a great enclosure for use on the desk or even wall mounting. Shop Enclosures Terminal Blocks Terminal blocks from CamdenBoss, a versatile PCB solution. These PCB terminal blocks come in a variety of sizes and styles including Rising Clamp, Wire Protector, Pluggable, and Screwless. Shop Terminal Blocks On the Blog... Noch keine Beiträge in dieser Sprache veröffentlicht Sobald neue Beiträge veröffentlicht wurden, erscheinen diese hier. With over 25% of the UK PCB Terminal Block market, Gateway Electronic components is proud to represent and distribute the Camden Boss range of components. From 2.54mm-10.16mm pitch, wire protected or rising clamp, 4A-57A rated, PCB mounted and pluggable terminal blocks and other interconnection solutions. There is, however, more to the CamdenBoss range than interconnect, in fact CamdenBoss offer a wide range of electro-mechanical components such as fuses & fuse-holders, LEDs, miniature switches, limit & safety switches and control products. A housing solution can always be found with one of CamdenBoss’ universal housings. Consequently, they have an extensive range of hand-held enclosures, die-cast boxes, potting boxes, desktop cases, instrument cases. They also offer a full customisation service for all our enclosures; with custom colours, surface coating & RFI shielding, engraving & silk-screening, labels & membrane keypads, as well as milling for all types of connectors and control components. Custom enclosures are designed, prototyped and manufactured to specific and exacting requirements. With rapid lead-times using their Tool-Free Flat Sheet Plastic Technology process called Custom Design. This is an innovative solution for unique enclosure requirements that can now be achieved without the expensive tooling costs historically associated with bespoke designs. For medium and high volume enclosure requirement they offer the complete product design and manufacturing solution, which includes 3D modelling, design, tooling, manufacturing, component sourcing, assembly and packaging. Manufacturer's Website Back to Manufacturers

Ferrite Cores Ferrite cores from Fair-Rite. We stock a range of core shapes, sizes and materials to suit your application. Shop Ferrite Cores Toroids Toroids from Fair-Rite. Toroids are suitable for use in signal transformers and as EMC chokes. Shop Toroids EMC EMC from Fair-Rite. Electromagnetic Compatibility (EMC) filters are designed to ensure that electronics are not affected by, and do not themselves generate, electromagnetic disturbance. Shop EMC Ferrite Accessories Ferrite accessories from Fair-Rite. These accessories can be used alongside our stocked range of ferrite cores. Shop Ferrite Accessories Ferrite Rods Ferrite rods from Fair-Rite. Ferrite rods are suitable for use in applications such as line filters and RFID tags, as they work by directing the magnetic component of radio waves towards a pick-up coil. Shop Ferrite Rods On the Blog... Noch keine Beiträge in dieser Sprache veröffentlicht Sobald neue Beiträge veröffentlicht wurden, erscheinen diese hier. Fair-rite are a world leading ferrite manufacturer that specialise in two main areas, Suppression and Power & Inductive components. Fair-Rite offer a wide range of suppression products designed to help you solve all of your EMI issues, these include, board based components such as EMI suppression beads, surface mount beads (common mode), Multi aperture cores, chip beads, chip arrays and flexible ferrite sheets. They also offer a wide range of cable suppression products including, round and flat EMI suppression cores, Connector suppression plates and Snap-It cores. Fair-Rite also offer the standard power and inductive ferrite products. The offer a wide range of standard shapes and geometries including Pot, E, EFD, ETD, EER, EP, Planar, PQ, RM and U cores in a range of materials each suited to specific applications. They offer a large range of toroids. By building on their core competencies Fair-Rite are able to offer a range of ferrite rods and bobbins. Manufacturer's Website Back to Manufacturers

The last few years have seen the Machine-to-Machine (M2M) and Internet-of-Things (IOT) market emerge and expand rapidly progressing into every walk of life. These two new facets of life are and will be responsible for automating just about any part of society. Now that cellular wireless networks are ubiquitous and now with much lower cost of data plans and cost of ownership, the advancement of the internet, M2M and IOT will see an even faster growth. Siretta is a leading supplier of wireless M2M products and overall solutions, specialising in wireless modems, cloud based software and overall M2M application solutions. As a major UK distributor for the Siretta brand, Gateway now stock a broad range of antennas, cable assemblies and RF connectors/adaptors all available online with a next day delivery service. Siretta have chosen the Gateway team to be trained in their high level of technical in all matters wireless and combined with In-house programming and design skills this is now allowing Gateway to support numerous customers in utilising the benefits of the Siretta range. Siretta is at the forefront of wireless M2M and IOT thinking with its design and manufacture of GSM modems and Cloud software and services to empower the user, small or large, and make M2M applications simple and a cost-effective reality. Manufacturer's Website Back to Manufacturers On the Blog... Noch keine Beiträge in dieser Sprache veröffentlicht Sobald neue Beiträge veröffentlicht wurden, erscheinen diese hier. Signal Analysers Signal analysers from Siretta. Find optimum antenna placement, best network performance and best choice of network operator for a site. Shop Signal Analysers Antennas Wireless RF solutions require antennas as a fundamental component for end-to-end communications. We stock a wide range of Siretta antennas with different mountings. Shop Antennas Modems We stock a range of industrial cellular modems from Siretta allowing easy connection to remote devices over the internet. All modems include an RS232 and USB serial connection. Shop Modems Routers Industrial cellular routers from Siretta. Dual-SIM cellular connection with multiple ethernet ports combined with RS232, RS485 and USB interfaces. Shop Routers Cables Siretta RF cables that can be used for small interconnections, machine-to-machine interconnections and extension cables. Shop Cables Adapters RF adapters from Siretta are used to connect several different cables together allowing the ability to swap or change the lengths of the RF cable links. Shop Adapters

Ferrite Cores Ferrite cores from Ferroxcube. We stock a range of core shapes, sizes and materials to suit your application. Shop Ferrite Cores Toroids Toroids from Ferroxcube. Toroids are suitable for use in signal transformers and as EMC chokes. Shop Toroids EMC EMC from Ferroxcube. Electromagnetic Compatibility (EMC) filters are designed to ensure that electronics are not affected by, and do not themselves generate, electromagnetic disturbance. Shop EMC Ferrite Accessories Ferrite accessories from Ferroxcube. These accessories can be used alongside our stocked range of ferrite cores. Shop Ferrite Accessories Ferrite Rods Ferrite rods from Ferroxcube. Ferrite rods are suitable for use in applications such as line filters and RFID tags. Shop Ferrite Rods On the Blog... Noch keine Beiträge in dieser Sprache veröffentlicht Sobald neue Beiträge veröffentlicht wurden, erscheinen diese hier. Manufacturer's Website Ferroxcube , (formerly, a Philips Components company), is now one of the worlds strongest suppliers of passive components. As a result, they are widely recognised as a leading supplier of ferrite components (that includes cores, bobbins etc), has manufacturing operations, sales offices, and customer service centres all over the world. In addition, Building on Philips Magnetic Components heritage, Ferroxcube, offers customers the highest level of support in the development of their new innovative design. Not only, being the leading supplier in ferrite-ceramic technology. Ferroxcube offer a broad range of soft ferrite cores, accessories and EMI suppression products to support equipment manufacturers in their electromagnetic inference. Therefore, they can also offer extensive design-in support which includes, application information and software to help designers optimise their new designs. Consequently, they are constantly developing new materials and with a strong research and development team. Furthermore, they continue to develop lower power losses and higher saturation magnetic flux densities over a wide range of operating frequencies. Almost all, Ferroxcube products are now available from Gateway Electronic Components. Above all, Gateway holds large stock of ferroxcube ferrite cores and accessories. In addition, Gateway also provides customers with a strong technical sales team supported by our technical department who would be happy to help you with your enquiry. Quality and environmental approach Ferroxcube’s commitment towards excellence applies also to the environment. This means, Ferroxcube strive for the highest standards of health and safety for everyone. In addition, to assure outstanding quality in both products and services, all of Ferroxcubes production centres are certified to ISO-9001/9002 standards. Moreover, in line with the worldwide lead-free legislation, they have introduced lead-free plating on all of their formerly tin/lead containing products. As a result, Ferroxcube comply strictly with the directive on Waste Electrical & Electronic Equipment (WEEE 2002/96/EC). Restriction on Hazardous Substances (RoHS 2002/95/EC) and Registration, Evaluation, Authorisation, and restriction of Chemicals (REACH). Back to Manufacturers

Wir können die gesuchte Seite nicht finden Diese Seite gibt es nicht. Die Startseite öffnen und dort umsehen. Zur Startseite

privacy Policy We make use of software packages to assess the suitability of our site functionality and the user experience when using the system. The software collects non-personal information about the site's visitors: activity statistics, accessed files, paths through the site, information about referring pages, search engines, browsers, and operating systems. The data generated from the software is only analysed in a consolidated general format. We are happy to share with you any information about the web access analysis software that we use. Web Access Analysis Information that we gather as part of any response form is not shared with any other organisation. Use of Information We comply with the Data Protection Act and the Privacy and Electronic Communications (EC Directive) Regulations 2003. If you have any comments on this issue or any other matter we welcome your input. Data Protection To view our privacy policy to its full extent, please click here More info Gateway Electronic Components takes its care of privacy responsibility very seriously. Set out below is our privacy policy, and we welcome all input from any source on recommendations for improvement.

Contact Us Get in Touch First name Last name Email Company Message Submit Thanks for submitting! Opening Hours Monday 8:30am - 5pm Tuesday 8:30am - 5pm Wednesday 8:30am - 5pm Thursday 8:30am - 5pm Friday 8:30am - 4:30pm Saturday + Sunday Closed Details Gateway Electronic Components Ltd Innovation House Beam Heath Way Nantwich Cheshire CW5 6PQ +44 (0) 1270 615 999 sales@gatewaycando.com VAT no: 753 1007 66 EORI no: GB753100766000

Microswitches Microswitches from ITW. These switches use ITW's Butterfly Double-Break switching which provides a high standard of reliability for industrial and military products. Shop Microswtiches Pushbuttons Pushbuttons from ITW. These are suitable for a variety of applications, including for HMI panel controls and sensing in equipment controls. Shop Pushbuttons Rotary Switches Rotary switches from ITW. These switches open and close the circuit as the shaft is rotated, making and breaking multiple electrical connections. Shop Rotary Switches Slider Switches Slider switches from ITW. These switches are highly reliable and have broad operating characteristics - providing excellent performance in a wide variety of applications. Shop DIL Switches Within ITW's wide portfolio, they can ensure that if you want to interact with it, sense it, control it, or switch it, they can fulfil each individual customer requirement. Their latest technologies ensure that they take you beyond the traditional, single output and input switching, to the state of the art, software driven, intelligent thinking touch sensors, linked to any system of the customers choice. They have technical in-house design capabilities that harness the overall appreciation of usage acoustic, capacitive and inductive switching ensuring that ITW have the right solution for your individual specification. Switches have created and developed a wide range of products for a wide spectrum of industrial applications. Their comprehensive standard product portfolio includes assemblies, switch panels, push button, micro, slide as well as rocker switches. If ITW Switches doesn’t have the ideal product for you, they will work with customers to design one that is able to suit the specific application. They pride themselves in working closely with their customers providing quick solutions to their problem. Manufacturer's Website Back to Manufacturers

About Us Gateway Electronic Components was founded in 2000 by a team of industry professionals time-served in the franchised components distributor sector. With unrivalled expertise in finding ways of bringing innovative supply solutions to customers seeking to release substantial costs from the procurement process. Since then, the company now has four specialist pillars that include specialist components, IoT and connectivity, power products and ferrite products all supported by a wealth of technical expertise and resource to assist customers with not only standard solutions but having the capability to design bespoke solutions to meet their requirements. All are also available to order online through the multi-language and multi-currency website with shipping options available around the world. These pillars are supported by the Machine Shop and PCB Design and Manufacturing services. Gateway trades from Nantwich, Cheshire ideally placed close to ports and airports, freight hubs and the road and rail transport infrastructure. Trading with more than 1000 customers in over 50 countries; the company offers significant profile inventories from its base of world-class manufacturers. As well as this, dedicated customer contract buffers and supply solutions are available to assist customers in reducing their vendor base and helping drive down the total cost of ownership. Gateway, the distributor with a CanDo spirit! Our History The Gateway Journey Start of the E-commerce Journey 2004 - 2006 Gateway launches its first ecommerce platform www.thecomponentgateway.com to promote its stockholding of products from its franchised linecard of manufacturers. Gateway complies with Restriction of Hazardous Substances Directive 2002/95/EC, (RoHS 1) by designing and maintaining a further level of quality audit procedures to its material procurement and inspection programme. New HQ! - 2009 - 2011 The quest for new premises is fulfilled and Gateway relocates to Innovation House, Nantwich, Cheshire, giving a 61% increase in office and warehouse space. For the next 2 years Gateway achieves double digit growth to realise market share gains to further strengthen its position as one of the best-in-class specialist distribution outlets for electronic components in the UK. Gateway continues to develop its operating systems capability and online presence with the launch of its second generation ‘Core-2’ operating system which accommodates multi-currency trading to better manage the currency environment with its suppliers and for its UK and overseas customers. The Very Beginning - 2000 Gateway Electronic Components Limited registered as a trading entity with Companies House. Gateway commissions the design, develop and implement of a bespoke operating system for the company to platform its transactional databases and interface these with the financial management system. Gateway secures the lease for its first premises at Unit 10, Huntsbank Works, Crewe. Accreditation Secured - 2001 - 2003 Gateway receives its first BS EN ISO9000:1994 accreditation from United Registrar of Systems. Since its first award Gateway has upgraded its accreditation status and now complies with ISO9001:2015. Ferroxcube and First Apprentices - 2017 Gateway is appointed as a UK franchised distributor by Ferroxcube, a global leader in high performance ferrite materials. The Ferroxcube range augments the portfolio of products already available from Gateway from manufacturers TDK, Fair-Rite and Magnetics Inc, and strengthens Gateway position as the largest stocking distributor of ferrite core products and accessories in the UK. Gateway employs its first apprentice intake, filling IT and Digital Marketing positions with some highly talented school and college leavers. The initial intake has now progressed to full time positions now making significant contributions to the company’s development. Three further apprentices have been employed in the company in engineering, IT and customer service roles and will all have promising careers with the company. The CanDo Man in a Kanban Van - 2013 Gateway secures a contract to manage the supply of products to its largest customers by implementing Vendor Managed Inventory (VMI) solutions on various customer’s premises. The contracts, comprising over 700 lines of electronic components shipped direct-to-line to Kanban stations on the customers production floors, delivered by Gateway staff on a twice weekly replenishments system, was tagged “The Cando man in a Kanban Van”. The solution has realized significant efficiency gains and thereby reduced total cost of ownership for those customers. Gateway appointed by TDK as its specialist magnetic components distributor for the UK. Gateway invests in significant stockholding of Ferrite products, and within 3 months develops and launches its second specialist sibling ecommerce platform www.theferritegateway.com to support the growing base of UK customers. Within the next 18 months Gateway increases TDK distributed ferrite sales revenues by more than 45%. Gold! - 2015 Gateway secures Silver status in the TDK Senten Manten awards in recognition of its achievement on meeting key business performance and customer service standards. The Japanese term Senten Manten means “perfect result”. Gateway is appointed by Siretta Limited as its UK specialist distributor to promote and sell its range of products for use within emerging IoT and industrial M2M applications in the ever growing smart-world, including wired and wireless network connectivity solutions, antenna, modems, routers and network signal strength analysis products. Gateway develops and launches its third specialist sibling ecommerce platform www.theiotgateway.com to promote and sell the product range. For the second year running Gateway receives recognition in the prestigious TDK Senten Manten awards programme, this time achieving a coveted Gold award, in recognition that the company’s specialist, service-led, differentiated and value-adding distribution ethos is of appeal to a broad customer base across the UK and increasingly into Europe. 2017 - The Machine Shop Gateway launches the Ferrite Machine Shop to provide a core gapping and machining service to support its customers that require bespoke dimensional and/or inductance values to meet their specific application requirements. The significant investment in infrastructure and machinery includes a dedicated Machine Shop environment within Gateway’s UK based headquarters, a 3-axis NC flatbed surface grind centre, and an enhanced operating system to provide a production works order solution that provides full batch traceability for all parts used within the machining process. 20th Year! - 2019 Gateway enters is 20th year of trading having developed a unique position in the electronic components supply environment as a specialist, differentiated and value-adding service-led distributor with a CanDo attitude capable of delivering standard and bespoke solutions to customers big and small, and able to facilitate total cost of ownership optimisation with its range of supply solutions and logistics programmes. 2018 - First Mini Mill Further Machine Shop investment is made by Gateway as it installs a new Haas Mini-Mill machining centre to be able to provide its customers with even more geometric and dimensional solutions to bespoke machining requirements. Gateway can now manufacture new core geometries from ferrite plate, block, rod, toroid, or button cores and has also developed an expertise to glue multiple geometries to custom-design assembled parts. The phrase “if you can dream it, we can machine it” is born. We've got the Power - 2018 Gateway launches a new sibling ecommerce brand www.thepowergateway.com to promote products for use in the improvement of power quality solutions and power factor correction, to help drive for efficiency, lower operating costs and faster returns on investment in the power generation, transmission and distribution sector. With a significant new stocking investment in TDK Power Factor Correction (PFC) products, including PFC Capacitors and filters, controllers, and switching devices along with a range of Power Electrolytic Capacitor (PEC) products, Gateway is continuing to develop its specialist and differentiated channels to service key growth market sectors. Specialising in Ferrite and Magnetic components for use within the transformer, power supply and winding house sectors, along with EMC components for interference suppression. This is supported by the latest addition to the company, The Machine Shop. Shop Ferrite Serves customers by providing products dedicated for use within emerging IoT and industrial applications in the ever evolving smart-world. This includes wired and wireless network connectivity solutions, antenna and network signal strength analysis products. Shop IoT Offering products to use in the improvement of power quality solutions and power factor correction. This helps to drive for efficiency, lower operating costs and generate faster returns on investment in the power generation, transmission and distribution. Shop Power Dedicated to specialist parts which can be used across passive, inter connective, electromechanical, switch, relay, rectifier, optoelectronic and cooling products. Shop Component

Quality JOSCAR CERTIFICATE Gateway Electronic Components Ltd are pleased to announce we are now a JOSCAR approved supplier. The JOSCAR Registration Mark is valued by some of the largest purchasers in the defence and security community and indicates that our organisation has gone through all the process required to demonstrate our quality commitment and credentials to the industry. To download our most recent certificate, please click here ISO CERTIFICATE Gateway is committed to upholding the quality standards set out in the procedures of the accreditation bodies to which it belongs, but it also prides itself in providing solutions to generic and customer specific issues where a viable solution can be designed. Inspection procedures at Gateway performs a rigorous and detailed inwards inspection process to all receipts made into its premises; but will offer customers enhanced inspection support to ensure that additional levels of standards are maintained, including enhanced visual inspection, testing, counting and marking services. Gateway will decant into customer specified supply multiples; have product reeled or re-reeled; affix customer specific labelling to product; and if required will house the parts in dedicated customer specific locations. Gateway can offer electronic testing services to check for product provenance and integrity as well as offering a service to replace ROHS compliant plating or terminations with SnPb . All these services are governed by our stringent quality control and inspection procedures. Within six months of its inception in August 2000, Gateway gained BS EN ISO9001:2000 accreditation, and has since progressed through continual improvement to the new ISO9001:2015 standard. We see it as a testament to its quality systems programme and to its business management and bespoke operating system, developed in house by its team of Quality and Systems Support staff. To download our most recent certificate, please click here ROHS Gateway has been running a fully implemented ROHS (2002/95/EC) compliance programme since 2005, and can provide full batch traceability on parts handled within its system. Whilst most of the new parts now procured are ROHS compliant, Gateway can provide customer access to stocks of non-ROHS material on parts now only manufactured in ROHS format. We can also recommend sources for non-ROHS material for customers that hold industry-sector or product-exemption-to-ROHS compliance. For more information click here ECSN AND AFDEC Gateway Electronic Components is a member of The Electronic Component Supply Network (ECSN), a trade body that now incorporates the Association of Franchised Distributors of Electronic Components (AFDEC). ECSN is now in its 42nd year as a “member managed, not-for-profit” trade association linking manufacturers, channel partners and systems integrators. The association has a membership that covers the whole spectrum of the life cycle of an electronic component. It boasts Leadership Groups active in the areas of Research, Manufacturing, Distribution, System Integration and End of Life. EMC HANDLING Gateway operates EMC handling procedures in accordance to BS EN 100 015-1. We also have moisture sensitivity level (MSL) controls in place, and can offer MSL repackaging and baking services. REACH Gateway understands the importance of communication through the supply chain and is committed to passing on any information required under the REACH regulations. REACH (Regulation, Evaluation, Authorization and Restriction of Chemicals) entered into force on 1st June 2007 to streamline and improve the former legislative framework on chemicals of the European Union (EU). REACH places greater responsibility on industry, to manage the risks that chemicals may pose to health and the environment. To view the company's REACH statement please click here CONFLICT MINERALS On July 21, 2010, the Dodd-Frank Wall Street Reform and Consumer Protection Act was signed into law in the USA. The Dodd-Frank Act and related U.S. Securities and Exchange Commission rules require certain companies to disclose the extent to which the products they manufacture or contract to manufacture, contain conflict minerals, sourced from mines in the Democratic Republic of the Congo (DRC) or adjoining countries. Conflict minerals include tantalum, tin, tungsten and gold, which are used in many electronic components and computer products. As a distributor of electronic components, Gateway promotes the traceability of these minerals and the transparency of the supply chain. Gateway firmly believes that its customers should be fully informed about the products they purchase. While Gateway, as a distributor, is not able to certify as to the country of origin of the minerals contained in the products manufactured by its suppliers; as part of its due diligence, Gateway has requested that all its suppliers, upon acceptance of Gateway orders, are agreeing to supply said products which do not contain any raw materials defined as “conflict minerals”. Important information on the use of conflict minerals in the technology supply chain is being compiled by the Electronics Components Industry Association and the Electronics Industry Citizenship Coalition. This information may be viewed at here UNIPART RAIL TECHNICAL DOSSIER To download our most recent certificate, please click here